Poly-Mud H

Acrylic polymer
2458-011-14023401-2012

Poly-Mud H is a partially hydrolyzed polyacrylamide with high molecular mass and average anionic activity, obtained by way of salt polymerization of acrylamide and sodium acrylate. It improves rheological properties of drilling fluids, which contributes to efficient outflow of drill cuttings from the borehole.

It is delivered in bags of 25 kg.

Purpose

Poly-Mud H is designed for flocculation, encapsulation of drill cuttings in water-base drilling muds. It is also used to increase the viscosity of drilling mud and to consolidate the walls of borehole. It forms a thin, solid filter cake on the walls of borehole, which prevents the hydration of clays and colmation of pore throats.

Find out if the reagent is appropriate to solve your tasks

Order the sample and test it in real conditions. Later on, our laboratory will elaborate on this reagent to adjust it to your specific needs.

order the sample Learn more about the Himprom, LLC laboratory

Physical and chemical properties

Property
LV
HV
Appearance at 20 °С
White or yellowish friable powder
White or yellowish friable powder
Mass part of moisture*, %, maximum
10
10
Bulk density, g/cm3
600-800
600-800
PH value 1-% water solution*
6 - 8
6 - 8
Dynamic viscosity by Brookfield mPa*с 0.5% solution in 10% solution of NaCl
90-135
Minimum 200
Granulometric composition, % of mass. granules of size
More than 1250 mkm, maximum - 10
Less than 100 mkm, maximum - 2

*Property shall be measured on the Customer’s demand


Recommendations to application

Poly-Mud H is used in drilling fluids in concentrations up to 0.3%.

Quality Himprom LLC

All products of “Himprom” LLC have Quality Certificates

Learn more about the quality control of the “Himprom” LLC products

How to order

Leave your application
Our manager will contact you to find the appropriate chemicals according to your application
Add to your application
Call us
Call us by phone and our specialists will help you to find an appropriate solution for your tasks
+7 342 225-02-06
E-mail us
Write up your application and e-mail it to us

zakaz@himprom-group.ru
Describe your task, and we will find a solution
Contact our specialists. Together we will find the best solution for you.