BETALOCK

Composition for Heavy Liquids without Solid Phase Preparation

2458-061-14023401-2013

Composition BETALOCK is designed for preparation of 1.35 to 2.3 g/cm³ density heavy process liquids without solid phase, used for preparation of drilling, well killing, perforation and conservation fluids. BETALOCK is enhanced salt composition.

Composition BETALOCK is delivered in big-bags of 1,000 kg. Packaging may be changed on customer demand.

Add to request

Purpose

Composition BETALOCK used for preparation of process fluids performs several advantages over traditional formulations:

Remained reservoir properties and well capacity due to absence of solid phase;

Multiple increase in successful jobs for subsurface equipment installation and repair, especially in deep holes;

Reduction of process fluids preparation costs;

Low corrosive activity of process fluid.

Find out if the reagent is appropriate to solve your tasks

Order the sample and test it in real conditions. Later on, our laboratory will elaborate on this reagent to adjust it to your specific needs.

Learn more about the Himprom, LLC laboratory

Physical and chemical properties

Property

Grade A

Grade B

Grade V

Appearance at 20°С

Solid free-flowing composition of white to light-yellow color

Process fluid density, g/cm³

1,55-1,62

1,75-1,83

1,84-2,30

Water insolubles mass content, %, max

1,0

Moisture content, %, max

5,0

pH of 1%-water solution

6,0 – 8,0

3,0 – 7,0

Process fluid pour point, ℃, max

minus 20

Recommendations to application

Recommendations for use

Composition BETALOCK is completely soluble in fresh water. Its consumption rate depends on required density of the fluid. In case additional weighing of the fluid is required, the BETALOCK is mixing to the fluid till completely dissolved and the required density is obtained.