Chemical reagents for drilling

Purpose

HimCell Grade B-10 is used as a thickener in the production of dry building mixtures and paintwork materials. The product has the following advantages:
• it allows you to effectively adjust the viscosity of the solution to achieve the optimal value;
• it increases the workability of the mortar mixture and provides a long time of operation due to its high water-holding capacity;
• it contributes to the growth of adhesion and strength characteristics of the product; • it has good solubility in cold water, which simplifies the introduction of the reagent in the preparation of the construction mixture and avoids the formation of lumps;
• it is not toxic and does not have a destructive effect on the environment.

Find out if the reagent is appropriate to solve your tasks

Order the sample and test it in real conditions. Later on, our laboratory will elaborate on this reagent to adjust it to your specific needs.

order the sample Learn more about the Himprom, LLC laboratory

Physical and chemical properties

Property

Standard

Appearance

White to light yellow powder

Granulometric composition, % of mass granules with size more than 0.2 mm, max

10,0

*Residue after calcination, %, max

22,0

Moisture content, %, max

7,0

pH value of 2% water solution, pH units

5,0-11,0

*Dynamic viscosity of 2% water solution (Brookfield viscometer), mPa·s

800 – 1400

Recommendations to application

HimCell Grade B-10 is recommended to be added to the mixture as follows: mix with dry ingredients, add room temperature water to the composition and mix until the required consistency is achieved. The recommended concentration of the chemical product is 0.2- 0.5 % by weight of the solution. The optimal concentration depends on the parameters of the building mixture. Please contact Himprom representatives in order to choose the optimal concentration.