Poly-Mud Thin — Himprom

Purpose

Poly-Mud Thin drilling fluids’ tannin based thinner is a highly efficient rheology controller for water based fluids.
Advantages:
• Much more efficient than conventional lignosulfonate based additives;
• Poly-Mud Thin is environmentally friendly agent: chromeless composition makes it possible to be used at locations with high environmental restrictions;
• Poly-Mud Thin can be used with conventional lignosulfonate based additives to enhance their properties.

Find out if the reagent is appropriate to solve your tasks

Order the sample and test it in real conditions. Later on, our laboratory will elaborate on this reagent to adjust it to your specific needs.

order the sample Learn more about the Himprom, LLC laboratory

Physical and chemical properties

Property

Standard

Appearance

Powder of light brown to brown color

Moisture content, %, max

12,0

pH of 1% aqueous solution, min

4,0

Dilution rate, %, min

Foaming capacity, cm3, max

Recommendations to application

To optimize the structural and rheological properties of the solution, it is usually enough to use from 3 to 10 kg of Poly-Mud Thin per 1 m3 of the solution. Exceeding the recommended concentration can lead to a sharp decrease in viscosity at a low shear rate. To determine the required concentration and effectiveness of the liquifier, it is recommended to conduct preliminary tests in a model solution. The recommended ratio for improving the properties of reagents based on lignosulfonates is 1:4 (Poly–Mud Thin to lignosulfonates).