HimGid

Hydrate Inhibitor

(TU) 20.59.59-286-14023401-2020

HimGid is a composition of surfactants in an organic solvent. HimGid has one grade - G-331.

HimGid hydrate formation inhibitor is delivered in polyethylene barrels and other containers.

Add to request

Purpose

HimGid is used in the oil and gas industry to effectively prevent the formation and dissolution of gas hydrate deposits that can form in oil and gas production systems.

HimGid provides:

• reduction of capital and operating costs, no need for regeneration equipment;

• continuous production;

• safer and more environmentally friendly production;

• reduction of processing costs;

• elimination of products methanol contamination, higher product quality;

• minimization of the negative effect of methanol on oil/water separation;

• elimination of salt deposition associated with methanol;

• elimination of oxygen corrosion associated with the high solubility of oxygen in methanol.

Find out if the reagent is appropriate to solve your tasks

Order the sample and test it in real conditions. Later on, our laboratory will elaborate on this reagent to adjust it to your specific needs.

Learn more about the Himprom, LLC laboratory

Physical and chemical properties

Property

Standard G-331

Appearance

Homogenous light blue to blue liquid

Density at 20 °C, g / cm ³, range

0,75-0,83 (0,79±5%)

Kinematic viscosity, mm ²/с, max
+20°С
-40°С

20
500

Freezing point,°C, max

- 50

Corrosion activity of commercial grades, corrosion rate St3 at 20°С during 24 hours, g /( m ²* hour), max
for well stock
for other applications

0,089
0,125

Recommendations to application

HimGid hydrate formation inhibitor is recommended to be dosed continuously, or to carry out one-time treatments in a gas-liquid stream. The reagent feed point should be as close as possible to the hydrate formation zone. The dosage depends on the specific process conditions and is determined during pilot tests.