HimPar

REAGENT FOR ASPHALT-RESIN-PARAFFIN DEPOSITS CONTROL

(TU) 20.59.59-342-14023401-2022

HimPar is a composition based on a mixture of aromatic and aliphatic hydrocarbons with modifying additives. Depending on the application, the product is available in the following forms:
• solvent of asphalt-resin-paraffin deposits HimPar S-441
• inhibitor of asphalt-resin-paraffin deposits HimPar H-442.
Reagent for asphalt-resin-paraffin deposits control HimPar is delivered in polyethylene barrels and other containers.

Add to request request the price

Purpose

Reagent for asphalt-resin-paraffin deposits control HimPar is used:
• for the treatment of pipelines for in-field collection and transportation of oil in order to remove asphalt-resin-paraffin deposits from their inner surface;
• for the treatment of producing wells formation pay zone in order to intensify liquid
production by removing organic deposits from the pore space of the pay zone;
• for the treatment of oil wells to remove asphalt-resin-paraffin deposits from the surface of downhole equipment;
• for the treatment of formation pay zones of reservoir pressure maintenance system injection wells in order to increase their pick-up by removing organic deposits from the pore space of the pay zone;
• to reduce the viscosity of rheologically complex oils in order to improve their transportability by direct mixing.

Find out if the reagent is appropriate to solve your tasks

Order the sample and test it in real conditions. Later on, our laboratory will elaborate on this reagent to adjust it to your specific needs.

order the sample Learn more about the Himprom, LLC laboratory

Physical and chemical properties

Property

S-441

H-442

Appearance

Homogeneous liquid from colorless to dark brown color

Homogeneous liquid from colorless to dark brown color. Opalescence is allowed.

Density at 20 °С, gr/cm3

0,86-0,95 (0,91±5%)

0,85-0,94 (0,90±5%)

Kinematic viscosity mm2 /s, max
+20°С
-40°С

20
500

Freezing point, °С, max

- 50

Initial boiling point, °C, min

Corrosivity of the commodity form, corrosion rate of St-3 at 20 °C for 24 hours, gr/(m2 · hour), max

0,089
0,125

Recommendations to application

The optimal concentration of the product in each case is estimated taking into account the conditions, in order to choose the optimal concentration of the product it is recommended to contact Himprom representatives.